BYS防爆防腐荧光灯详细说明书
更新时间:2014-03-27 点击次数:1817次
BYS防爆防腐荧光灯(ⅡC) |
|
|
|
BYS防爆防腐荧光灯(ⅡC) BYS Explosion-proof, Corrosion-proof Fluorescent Lamp (ⅡC) | | | | 1. 爆炸性气体环境危险场所:1区、2区; 2. 可燃性气体、蒸气级别:ⅡA、ⅡB、ⅡC; 3. 温度组别:T1~T6; 4. 户内、户外(IP65)。 5. 可配装20W、40W单脚或双脚双管荧光灯。 1. For the dangerous sites with explosive air mixture: 1division, 2division; 2. Flammable gas, steam class: ⅡA、ⅡB、ⅡC; 3. Temperatures classification: T1~T6; 4. Indoor and outdoor (IP65); 5. Access to fit can get the single- or dual-foot dual-fluorescent lamps of 20W or 40W. | | | | | | | 1. 壳体采用耐冲击、耐老化、阻燃、抗静电、强度高的SMC工程塑料模压成形或采用不锈钢板拉伸成形,外形美观、大方。 2. 灯罩采用聚碳酸酯注塑而成,透光性好,并能承受强撞击。 3. 外壳采用密封式结构,具有防水、防尘、防腐蚀等优点。 4. 内装电子镇流器和电感镇流器,及充砂型电子镇流器和电感镇流器,具有短路和开路保护功能,针对灯管的老化效应和漏气现象有预防电路,使灯管能正常工作,并且COS ≥0.95节能单脚荧光灯和双脚荧光灯可供用户随意选用。 5. 防爆型灯具具有开盖断电*的防爆电器联锁装置。 6. 电缆布线。 7. 符合GB3836-2000、IEC60079、GB12476.1-2000、IEC62241标准要求。 | 1. The case body adopts impact-resistance, aging resistance, fire inhibiting, antistatic and high strength SMC engineering plastic. 2. The lampshade is casted by polycarbonate, with high transpareny and impact withstanding ; umbrella; 3. The shell is sealed, with performances of water-proof dust-proof, corrosion-proof; 4. Inner fitted is electronical ballast and inductive ballast and own special sand-filled ballast. The single- or dual-foot fluorescent lamp is for choice. 5. The light has the interlock device that can cut power in case of capping. 6. Cable wiring; 7. Suitable for GB3836-2000、 IEC60079、GB12476.1-2000、IEC61241 standard request. |
| | |
| | 电压 Voltage (V) | 功率 Power (W) | 防爆标志 Explosion-proofing maker | 防护等级 Protection category | 防腐等级 Corrosion- proofing grade | 电缆外径 Cable's outside diameter (mm) | AC220±10% | 20×2, 40×2 | Exed qⅡ CT6 | IP65 | WF2 | Φ10 |
| | |
|